Archive | 07:11

Hot Patterns 1015: Riviera Once, Twice, Three Times a T-Shirt

18 May IMGP3243

While I have a stack of Hot Patterns’ that I’ve purchased, the Once, Twice, Three Times a T-Shirt came from a friend.

Almost true to the name, I made two of the three versions of this shirt. If I had a coverstitch, I probably would have made the third too.

In HP, I measure in a 12 (Glamour Girl) on top and a 14 (Slinky Girl) on the bottom. I’ve read HP is closer to RTW sizing. I’m telling myself they are close to UK RTW sizing. I buy an 8 in US RTW.  Based on reviews and the line drawing, I knew I wanted a snugger fit and cut a 10 through the upper body, an 8 at the waist and tapered back to a 12/ 14 at the hip. I also wanted a shorter version than drafted and took out six inches at the waist. In retrospect, I wish I had just done four inches for length.

The PR Reviews noted some errors in the directions. But, I didn’t follow them. The shirts have very basic construction.

All that being said, here’s the first version (note the French nauticalness of the red, white and blue). This style is based on a  $500+ Chloe shirt (I do not follow fashion. I only know it’s Chloe because Erica B. pointed it out four years ago!).

I made this tee up in two cotton jerseys from the Carol Collection. I always knew these were going to be a tee with contrast! I have narrow shoulders and hate things that feel like they might drop off, so I shaped the neckline by one inch, tapering into the shoulder. As drafted, it’s more like a slit.  I didn’t bother with the facings and just turned down the allowance. I also moved in the shoulder line by about 1 inch on each side (1/2 inch too much IMHO) to prevent my bra straps from showing or having the shirt slip off the side.

The pattern doesn’t note pocket placement and I don’t like where I put it. A little over and further down would make me happier. I sewed everything on my serger, hemmed with a twin needle and interfaced all the edges with tricot interfacing. I didn’t make an FBA either.

 

The front and back are the same

I *like* it. I don’t love it. It should have been longer and slightly more fitted to flatter my figure.

My yellow version is based on a $1200 Roberto Cavalli top.

I was totally not drawn to this style until I saw Christina’s version while checking reviews.And, now that it’s made up, I am 100 percent in love with it!

For this one, I moved the should line only 1/2 inch. This fabric is left over from my Burda 6-2010-123 sack dress. I bought in during PR Weekend in Philly. I still have enough left over for a fitted tee! I think I thought it would be a wrap or maxi dress when I first  bought it.

I didn’t hem the sleeves, but did finish the neckline and hem with a twin needles stitch in white.


The front and back are the same, I didn’t make my usual swayback adjustment


This sews up so fast it’s hard not to love. Each of these was made on a weeknight while watching TV. In the future, I’ll make it a little longer (I took too much length out). And, will have to try and resist not turning every slinky knit I have into one of these shirts. I think this pattern is good value for your dollar. You’ll get three tee shirts in one envelope. It’s awesome for a beginner too.

My review on PR is here