I managed to finish my spring raincoat in the last week of October. Heh. I have the best timing ever. I cannot believe this took me about a month to make. Which, if you read my blog before last year, would know is a ridiculously long time for me. I once made a winter coat in two weeks! It was even harder getting photos now that I leave the house at 7:30 am for work and don’t get back in until 7 pm. It’s dark when I leave and dark when I get home.
Also, I SWEAR to you, each time it rained I felt like I was being taunted. Now that the jacket is done, it’s just cold As I said last post, I left my rain coat in Amsterdam back in September. Nothing tells you how much you need a rain coat until you don’t have one!
Unfortunately, my DSLR camera is in the shop. So, we’re using my (still very good) point and shoot. But, I was hoping to try out some of the shooting ‘red’ suggestions. The photos below aren’t too bad. But, the red is photographing hot making it hard to see some of the details. On to the jacket!
This jacket is a basic parka with interesting details — something I think Burda excels in– when they aren’t making sack dresses. You could easily take about any parka pattern, add some D-rings and zippers and have the same look. But, this is also a good reason to hold on to your older Burdas. There’s a gem in there somewhere. This magazine is well over ten years old.
I’m a little late on completing this jacket because after I posted my last update I installed the zipper and tried the jacket on for the first time. Well, when I tried on the jacket, the casing wasn’t balanced (one side higher than the other) AND it wasn’t hitting my waist (too low). So, it looked pretty terrible. I sulked for a day and then decided to spend a few hours taking out six rows of teeny tiny stitching for the casing and redoing the whole shebang. When I re-sewed it, I moved the waist band up about an inch and added the missing fourth row from my first go. I was worried about the waistline casing then looking totally and completely overworked. But, this fabric actually heals pretty remarkably! And, totally waterproof.
Redoing the waistband casing was absolutely worth it. The jacket is not super fitted to begin with and I really needed the waist definition. The fabric was from a local warehouse sale and about $2 a yard. I seriously think this jacket was $20 to make or less! I did NOT tape the seams on this jacket. Because of all the topstitching, the seams were fairly water tight.
On this pattern, I made a 1.5 inch FBA, took 1/2 inch off the shoulders and made a swayback adjustment. I sewed a 40, grading out to a 46 with a touch more room in the thigh. My friend Liz thinks the jacket is a hair too big for me. But, I think it fits and allows for some boxier clothing underneath (i.e. the wool sweater I ‘m wearing).
What else… I wasn’t sure how to do the zipper so that the fabric lips covered up most of the teeth. I didn’t quite trust the Burda instructions and just did it my way. It’s not as closed as I would have liked. But, the blue zipper down the center isn’t as distracting as I thought it would be. And, I do love that the brass peaks through. I also found that NO NEEDLE (microtex, leather, sharp, universal) I had wanted to top stitch through the zipper tape and two layers of my fabric. One of these days, I need take a minute and flesh out my needle stash.
Speaking of zips… this two-way zip is 36 inches instead of the 40 asked for in the pattern. And, it was only $2.50 locally from Stadham Sewing in Baltimore (compared to $5 to $11 I saw online). The blue 9 inch zippers on the side were only 75 cents too.
And they had this tiny 4 inch zipper for the totally useless sleeve pocket (I hope that yellow wax washes out!). I love that place. I really may go in one day and buy four zippers in every color and length and just stash them.
The jacket is unlined and I am fine with that. The fabric is sturdy and doesn’t ravel.
Overall, I’m pleased with this jacket. And, I’m really glad I had my heavy Bernina to sew it with. I was looking at the top stitching on Jordan’s jacket and it’s kind of wonky compared to this. You really need a heavier machine when you’re dealing with unruly material.
For this jacket, I went with contrast ribbon rather than the recommended leather. While I love the color variation, these ribbons act a fool on the regular. Please see below. If I take the jacket off and let it sort of crumple on the floor, the ribbons comes loose entirely. I’m contemplating stitching them down to keep them in order.
The best thing about this project? It might our best photo shoot together. I might not have to fire Jordan as my photograper.
Ahhh. Onward. I’m starting a winter coat next. At my current sewing pace, I figure that will be ready just in time for spring 🙂